I’ve had my horse trailer for several years and used it very little. I almost always ride with a neighbor who has a nicer rig and who likes to drive, so my rig is mostly parked. Recently, though, I’ve started taking some lessons and that means I trailer my horse to the lesson place, and the trailer has come out of retirement.
That means the trailer has needed some assessment and attention that, really, should be done on a regular basis whether or not it is being used. You can never tell when you will need it for an emergency, be it a trip to the veterinary hospital or an evacuation, so it should be ready for action at all times.
Some of the basics include pulling up the mats and checking the floors, making sure the lights and brakes are in working order (and the brakes are adjusted properly), checking the emergency brake battery, and of course, checking the tires.
Tires are a particular challenge for me because, honestly, I’ve never been good at using a tire gauge. The minute the thing starts hissing at me, I just want to pull it off the stem. OK, I’m a wuss. But I did manage to ignore the hissing and actually get it seated properly to get an accurate reading, which was way too low. Fortunately, I have one of those portable battery chargers/air compressors and was able to get the tires, (including the spare–don’t forget the spare!) properly inflated. Figuring out proper inflation was a little tricky. This is printed on the sidewall of the tires, and I was looking for a “PSI” number, but my tires happen to have the inflation printed in “KPa” and not “PSI” so it took a while to figure out what number I was looking for. Then I had to go online to figure out the conversion to PSI. By the way, if you divide your “KPa” number by 7, you get the approximate PSI. In my case, it was 60 PSI.
The tires on the trailer are the original tires but have very few miles on them so the tread is great. A bigger concern is the fact that the trailer sits still so much, and sun exposure tends to cause sidewall cracks. There are a few minor cracks and I’ll be looking into replacing the tires soon. I also purchased some tire covers online. These are pretty inexpensive (I think I paid about $35 to cover all the tires) and you can buy covers to cover the tandem wheels on the trailer. Be sure to check the size. I got the “Small” size which fits my 15″ rims. Of course, check the specs on the particular covers you are buying. The covers should protect the tires from sun exposure and extend their life. Remember to take them off before moving the trailer! Yes, that sounds obvious, but still…And if you think that the sidewalls won’t blow out from sitting too much, think again. A neighbor borrowed my little-used pickup and the sidewall blew out on the freeway on a rather high bridge.
In the event of a flat, there is tool that will make your life a lot easier. This is a drive-on tool that elevates the good tire on the same side of the trailer so that the flat can be removed, eliminating the need for a jack. The brand name of the one I bought is Trailer-Aid, which seems to be the industry leader. One tip I learned a long time ago for changing tires is to loosen the lug nuts BEFORE raising the tire off the ground. It can eliminate a lot of tire spinning while you are trying to get those lug nuts loose! Speaking of which, make sure you have a lug nut wrench that fits your wheels, and that you know where it is and how to get to it. Smart idea to practice ahead of time.
If all this seems boring and excessive, let me share a story. While riding at a local recreation area, we encountered an acquaintance whose trailer had gotten sideswiped while leaving the parking lot. It blew out one tire completely (fortunately, that was the worst damage). She limped the rig back to the lot and there she found out how many things can go wrong. She did not have a jack. Her spare tire was flat. She couldn’t get hold of her husband.
Fortunately, my riding companion is “Miss Preparedness” and had the Trailer Aid. We helped the woman find a lug nut wrench that worked with her tires, and then we were able to remove the flat. That’s when we found out the spare was flat. Enter the park ranger, who had the portable compressor in his vehicle. We were able to inflate the spare, which thankfully held air, change the tire, and get the rig rolling again. But it took a team of people with the right equipment. (By the way, if you think the Highway Patrol is going to live up to the “To Protect and To Serve” motto and help out with this operation, you are wrong. They are not allowed to assist. Especially the seemingly 12-year-old officer who showed up for this event).
If all this has put you in the mood for shopping, here’s a pic of the tire cover and of the Trailer Aid, both purchased through Amazon. The tire cover is surprisingly easy to put on and take off.
One other item I bought is a cap for the trailer plug. “Stuff” tends to get in the holes in the plug and I’ve know people who blew fuses while plugging in the trailer, usually because some bug has taken up residence inside the plug. Really slows you down, and not so good for the bug either. The cap can keep the plug dry and clean. And make the world a little safer for bugs.
Excellent tips and cautionary tales, esp. for those of us who like to bury heads in sand when it comes to maintaining vehicles. Thank you, In Balance Equestrian Joan!!